Machinery and Equipment Category

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
RW AODD PUMP pneumatic double diaphragm pump. AODD PUMP, pneumatic diaphragm pump Air operated double diaphragm pump uses compressed air as the power source and used to convey various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. Pump body material can be plastic, aluminum alloy, cast iron, stainless steel etc. and diaphragm materials can be Santoprene, nitrile rubber, neoprene ,viton, Teflon etc according to the pumped liquids. The pump has self-priming function. It can idle and can submersible for working. The fluid conveyed is very wide, from low viscosity to high viscosity, from corrosive to viscous, fluids containing solid particles etc. No dynamic seal, no leakage Application 1. Pump peanut butter, pickles, mashed potatoes, sausage, jam, applesauce, chocolate, etc. 2. Pump paint, gum and pigment. 3. All kinds of adhesive and glue can be pumped. 4. All kinds of tile, porcelain, tile and ceramic glaze. 5. After the oil well is drilled, pump sediment and grout. 6. Pump various emulsions and fillers. 7. Pump all kinds of sewage. 8. Use the pump as the oil tanker and the barge to clear the warehouse and absorb the sewage in the warehouse. 9. Hops and fermented powder syrup, syrup, molasses. 10. Pump the water in the mine, tunnel, tunnel, mineral processing and slag. Pump cement grout and mortar. 11. Various rubber pastes. 12. Various abrasives, corrosive agents, oil and mud, cleaning oil dirt and general containers. 13. All kinds of highly toxic, flammable and volatile liquids. 14. Various strong acids, alkalis and corrosive liquids. 15. Various high-temperature liquids can withstand 150 degree celsius 16. As the front stage pressure supply device of various solid-liquid separation equipment.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Submersible sewage drainage pump auto coupling type. Submersible sewage pumps generally adopt automatic coupling (hereinafter referred to as auto coupling) installation method. The auto coupling installation system mainly consists of a quick interface, water drainage base, guide rail, guide rail positioning bracket, etc. During installation, the pump body and quick interface are tightly connected together by bolts. The water drainage base is first fixed in the water tank by anchor bolts, and the quick interface drives the pump to slide down along the guide rail. It is automatically coupled and installed with the water drainage base through the auto coupling sealing surface. After installation, the entire pump body and motor are connected together by the pump body outlet flange and the quick interface inlet flange. There is a rubber sealing ring between the outlet of the submersible sewage pump and the coupling interface of the auto coupling base. The submersible sewage pump is suspended in the air through the auto coupling system and the sealing ring is compressed by its own weight to ensure reliable sealing between pipelines. The main components of the WQ submersible sewage pump are the impeller, pump body, and submersible motor. The water pump and motor are on the same shaft, and since the water pump is located at the bottom of the entire sewage pump, it can maximize the suction of excess sewage from the ground. The WQ submersible sewage pump is suitable for conveying granular sewage and waste in industries such as chemical, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, as well as urban sewage treatment plant drainage system, municipal engineering, construction sites, etc. It can also be used to pump clean water and corrosive media. Pump can be made of cast iron or stainless steel material and equipped with high quality mechanical seal.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
DG Boiler feeding water pump. Horizontal multistage boiler feed water pump DG type self-balancing multistage boiler feed water pump is a common horizontal centrifugal pump used with the boiler. This type of centrifugal pump adopts the hydraulic model with high efficiency and energy saving, and has the characteristics of wide performance range, high operating efficiency and long service life, replacing the old GC type boiler feed pump. DG type self-balancing boiler feed pump adopts horizontal installation and multistage stage type on the structure, with stable operation and convenient installation and maintenance. This type of centrifugal pump is mainly composed of inlet and outlet section, middle section, guide vane, impeller, shaft, shaft sleeve, bearing, bearing body, seal, etc. It is mainly used in industrial boiler drainage, chemical smelting, paper industry, water conservancy engineering and other industries. Pump material: cast iron, cast steel , Mechanical seal or gland packing seal The temperature of the medium conveyed by DG type pump is not more than 105 degree celsius, which is suitable for small boiler feed water or conveying similar to hot water.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Fuel oil circulation gear pump. Fuel oil / lubricant oil circulation pump YCB Series circle arc gear oil pump is suitable to transfer various lubricant oils and other liquids similar to lubricant oils without solid grain and fiber and oil viscosity is 5-1500CST. Pump material: cast iron/steel (For oils which temperatures are not higher than 80 degree celsius) and stainless steel (For oils which temperatures are not higher than 200 degree celsius and corrosive liquids and drinks and oils etc without lubricant. And stainless steel pump with bronze gears can be used for liquids with low flash point such as gasolene and benzene etc. YCB gear pump can be matched normal motor and explosion-proof motor. Structure character: YCB Series circle arc gear pump is consisited of gear, shaft and pump casing, safe valve,mechanical seal for shaft end etc. Gear has high rigidity and intension after heating treatment. Gear and shaft are set in replacing shaft sleeve and operate together. Lubricant for all parts in pump can be finished on discharged medium by themselves when pump works. Reasonable designs in release oil and reture oil groove can let pump support minimum torsion force in operation of pump. So load and abrasion for bearing is very little and efficiency of pump is high. Pump is designed with safe valve is 5 times as discharge pressure of pump and can be ajdusted in allowed range. The safe valve can not work as relief valve for long time. Otherwise safe valve onto pipeline should be set. Viewed from shaft to pump end, pump is clockwise rotation. Application: YCB Series circle arc gear oil pump is used to transfer lubricant oil and booster in oil system and transfer and booster and injection in fuel oil system and used as hydraulic pump in hydraulic drive systerm etc. Ycb gear pump is widely used as lubricant oil pump in industry field.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Fluoroplastic alloy magnetic driving pump. Advantages of Fluoroplastic Magnetic Pump The fluoroplastic alloy pump is made by fusing polytetrafluoroethylene (F46) and polytetrafluoroethylene (F4) in a certain proportion - fluoroplastic alloy (F50), abbreviated as fluoroplastic alloy pump. Compared with F46, products made of fluorine alloy have higher material strength and higher temperature resistance. The working parts and impellers of fluorine plastic alloy pumps are made of fluorine alloy. The overcurrent section is made of fluorine materials such as lined polytetrafluoroethylene and perfluoroethylene, which are processed through reasonable formula molding. It has strong corrosion resistance, high mechanical strength, no aging, and no toxins. Fluoroplastic alloy magnetic pump is a chemical process pump that utilizes modern magnetic mechanics principles and permanent magnets to achieve non-contact indirect movement. The fluoroplastic alloy magnetic pump consists of a pump, a magnetic coupling, and a motor. The key components of a magnetic coupling consist of an outer magnetic rotor, an inner magnetic rotor, and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic substances, driving the inner magnetic rotor connected to the impeller to rotate synchronously, achieving non-contact transmission of power and transforming dynamic sealing into static sealing. The driving device is directly installed on the motor shaft, the pump chamber is completely closed, and the impeller on the rotor assembly rotates indirectly through magnetic coupling. Fluoroalloy pumps are processed and produced using special pump technology. Suitable for long-term transportation of any concentration of liquid acids, oxidants, and corrosive liquids at -20 to 150 degrees Celsius. Widely used in industries such as chemical, petroleum, pharmaceutical, pesticide, dye, paint, smelting, papermaking, electroplating, electricity, food, etc. The manufacturing, production, and acceptance specifications of the fluorine alloy pump series products strictly comply with relevant standards and specifications, with reliable performance, simple maintenance, and energy saving. It is a better corrosion-resistant transmission machinery. Fluorine alloy magnetic pump is a new type of chemical pump that is fully sealed, leak free, and pollution-free, with the characteristics of safety, high efficiency, and energy saving. Used for transmitting corrosive, toxic, flammable, explosive, expensive, or easily vaporized media. Due to its completely leak free advantage, it has successfully eliminated the faults of running, emitting, dripping, and leaking in fluid transmission, and has become an irreplaceable product in environmental engineering. It is applied in industries such as chemical, acid, alkali, smelting, rare earth, pesticide, dye, pharmaceutical, papermaking, electroplating, electrolysis, acid washing, radio, foil, scientific research institutions, and national defense chemical.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
CYZ Self priming centrifugal oil pump. CYZ horizontal self-priming oil pump is improved and developed by our company. CYZ self-priming oil pump is the ideal oil transfer pump for the oil industry, oil depot, oil tank truck land etc. It is suitable for the Marine cargo pump, bilge pump, ballast pump and machine cooling water circulation and so on. CYZ self priming oil pump is especially used to transport gasoline, kerosene, diesel, jet fuel, aviation fuel and other oils and sea water, clear water. medium temperature :- 20 ℃ to 80 ℃, When the pump is equipped with corrosion resistant mechanical seals and stainless steel material also can be used in chemical, pharmaceutical, brewing, electroplating, printing and dyeing, paper making, electric power, mining, etc. as a kind of energy-saving pump. Features of self-priming oil pump 1. CYZ-A self-priming pump has the characteristics of simple structure, easy operation, smooth operation, easy maintenance, high efficiency, long service life and self-priming function that other pumps do not have. There is no need for bottom valve in the pipeline, only to ensure that quantitative oils into the pump body can be stored before the pump works. With the function of "one-time drainage, lifelong self-priming", it can also be used as a bilge pump for oil tanker or Marine oil pump, and the bilge effect is good. 2. CYZ-A self-priming oil pump is made of cast iron pump house and bronze impeller and driven by explosion proof motor and mechanical seal with hard alloy material is durable. 3. Foot valves/bottom valves do not need to be installed onto the pipeline of inlet and outlet, thus simplifying the piping system and improving working conditions. Suction height is 4-5meters. Performance range of self-priming oil pump Flow rate: 3 ~ 500m 3 /h Head: 10 ~ 80m Operating temperature: -15℃ ~ + 120℃ Ambient temperature: ≤+40℃ speed: 1450/2900r/min Material: cast iron, stainless steel Seal: corrosion resistant mechanical seal Performance parameters of self-priming oil pump

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
Single stage end suction centrifugal pump. End suction centrifugal pump An end suction pump is a type of centrifugal pump which has a casing with horizontal suction inlet and vertical discharge outlet. They are almost for single stage pumps which have only one impeller and impeller is cantilevered on one of the shaft. End suction pumps can be used for any transfer or circulation of liquid and are capable of handling clean or dirty liquids and liquids with low viscosity. They are available in a wide variety of material combinations to suit any application. When the liquid enters the pump, it moves along the blades of the impeller which increases the flowing speed of the liquid. Thereafter , the liquid is transported into the spiral casing where the high flowing speed of the liquid is converted into high pressure with the help of the diffusion process. IS type end suction pump is applicable to industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transmission, HVAC refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment supporting, with the operating temperature of T is not higher than 80 degree Celsius. IR horizontal hot water end suction pump is widely used in the pressurized circulation transportation of hot water from boilers in metallurgy, chemical industry, textile, paper making, hotels and restaurants and urban heating systems. IR type operating temperature is not higher than 120 degree Celsius. IH horizontal chemical industrial end suction pump is used to transport liquids without solid particles, with corrosivity and viscosity similar to water. It is suitable for petroleum, chemical, metallurgy, power, paper making, food and pharmaceutical, synthetic fiber and other departments, and its operating temperature is from – 20 to 120 degree celsius.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
horizontal centrifugal chemical process pump single stage end suction. Stainless steel and titanium alloy chemical process pumps Compact structure: CZ pump has a compact structure, short axial size, small footprint, and convenient installation and maintenance. Strong versatility: This pump is suitable for conveying various chemical media, including corrosive media, high-temperature and high-pressure media, low viscosity liquids, high viscosity liquids, etc. High reliability: CZ pump adopts high-quality mechanical seals and key components such as bearings, which can ensure the stability of the conveying medium and the reliability of the equipment. Energy saving and environmental protection: The pump has excellent hydraulic performance, which can reduce the energy consumption of the conveying medium and achieve energy conservation and environmental protection. In terms of material selection, the hydraulic components of CZ pumps need to use materials with high corrosion resistance, high temperature and high pressure, such as stainless steel, alloy steel, high-temperature alloys, etc. These materials have good corrosion resistance and high-temperature and high-pressure capabilities, and can adapt to the transportation of various corrosive media. CZ standard chemical process pumps are mainly used in industries such as petrochemicals, fertilizers, pharmaceuticals, and food to transport various liquid media, such as acids, alkalis, salts, petroleum products, food, etc. It is a comprehensive and high-performance chemical process pump. In summary, CZ standard chemical process pumps have the characteristics of compact structure, strong universality, high reliability, energy conservation and environmental protection. In terms of material selection, materials with high corrosion resistance, high temperature and high pressure need to be selected. This pump is mainly used for conveying various liquid media in industries such as petrochemicals, fertilizers, pharmaceuticals, and food. It is a very practical fluid conveying equipment

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, HEFEI ANHUI
mobile jaw crushers. Crawler-type mobile jaw crushers are widely used in mining, stone mining, highway (railway) and bridge construction, recycling, and reprocessing of construction waste, and many other fields. They can be used to crush various materials such as river pebbles, mountain rocks (such as limestone, granite, basalt, diabase, andesite, etc.), ore tailings, stone chips, etc. Optimization design can improve the technical performance of crushers, achieving high productivity and uniform particle size of finished materials.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---