Metal Melting Equipment

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
YCB circle arc gear oil transfer booster pump. YCB circle arc gear oil pump Pumped fluids (lubricating oil ,fuel oi, hydraulic oil or other similar fluids with viscosity of 5-1500CST) YCB circle arc gear oil pump is Suitable for conveying lubricating oil or other liquids of similar properties without solid particles and fibers, non-corrosive. Liquid temperature is not higher than 80℃, viscosity of 5×10-6 ~ 1.5×10-3m2/s(5-1500 CST), as well as for hydraulic transmission systems. Scope of application In the oil transfer system YCB gear oil pump can be used for transmission, booster pump In the fuel system gear oil pump can be used for transport, pressure and injection fuel pump; In the hydraulic transmission system gear pump can be used as a hydraulic pump to provide hydraulic power It can be used as lubricating oil pump in all industrial fields. Structural features This series of gear pump is mainly composed of gear, shaft, pump body, pump cover, bearing sleeve, shaft end seal, etc. The gear is made of double arc sinusoidal shape. Compared with involute gear, the most prominent advantage is that the tooth profile does not slide relative to the gear during the meshing process, so the tooth surface has no wear, smooth operation, no trapped liquid, low noise, long life, high efficiency. The pump changes the traditional design to make gear pump enter a new field in design, production and use. The pump is provided with safety valve as overload protection, and the full backflow pressure of safety valve is 1.5 times of the rated discharge pressure of the pump. It can also be adjusted separately according to actual needs within the allowable discharge pressure range. However, it should be noted that the relief valve cannot work for a long time and other relief valve can be installed on the pipeline when necessary. Pump shaft end seal design has two forms including mechanical seal and packing seal, It can be determined according to the specific use and user requirements. Look from the main shaft to the pump, it is for clockwise rotation. Performance range Flow: 0.6 to 60m3/h Pressure: 0.6-1.6MPA Motor power: 0.75KW-22KW 50HZ, 380-415V,3Phase, 60HZ, 440-460V, 3Phase Cast iron pump or stainless steel pump

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
CQB-F fluoroplastic liner magnetic pump. Fluoroplastic magnetic driving chemical industrial pump The flow parts of CQB-F fluorine plastic magnetic chemical pump are for fluorine plastic (F46/PFA/FEP/PTFE/ETFE/PVDF etc.) materials. Pump outer casing is for metal material (cast iron or carbon steel) to be enough for supporting pipeline weight and resisting mechanical impact. Flow parts of CQB-F fluoroplastic liner magnetic pump are made of fluoroplastic (F46/FEP/PFA) and have a very good corrosion resistance. CQB-F fluoroplastic liner magnetic pump can transport any concentration of acid, alkaline, oil, rare and valuable liquid, toxic liquid, volatile chemical medium. It is especially suitable for the transport of flammable, leaky and explosive liquid chemical medium. Sliding bearing of magnetic pump can be impregnated graphite, filled with polytetrafluoroethylene, engineering ceramics, etc. Because engineering ceramics have good heat resistance, corrosion resistance and friction resistance, the sliding bearings of magnetic pump are mostly made of engineering ceramics. Because the engineering ceramics are very brittle and the expansion coefficient is small, the bearing clearance shall not be too small to avoid shaft holding accident. CQB-F Fluoroplastic chemical industry magnetic pump has the advantages of compact structure, beautiful appearance, small volume, low noise, reliable operation and so on. CQB Fluoroplastics magnetic driving centrifugal chemical pump can continuously transport acid, alkali, oxidant and other corrosive media with arbitrary concentration. Applicable temperature: -30℃-120℃

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
IHF fluoroplastic liner chemical centrifugal pump . Chemical centrifugal pump for acids unloading IHF single-stage single-suction steel-lined fluoroplastic, polypropylene and other chemical centrifugal pumps (IHF centrifugal pumps for short) are designed according to international standards and combined with the process of non-metallic pumps, and manufactured with tortoiseshell mesh lining technology. Compared with other similar pumps, IHF centrifugal pumps have the advantages of anti-falling and anti-cracking lining. The pump body is made of metal shell lined with polytetrafluoroethylene propylene (F46), polyvinylidene fluoride (PVDF), polypropylene (PP), etc. The pump cover, impeller and shaft sleeve are made of metal inserts wrapped with fluoroplastics and sintered and pressed as a whole. The shaft seal is an externally mounted mechanical seal with excellent sealing performance. The inlet and outlet of the pump are reinforced with cast steel to enhance the pressure resistance of the pump. The actual use shows that the pump has the advantages of corrosion resistance, temperature resistance, non-aging, high mechanical strength, stable operation, advanced and reasonable structure, tight and reliable sealing performance, convenient disassembly and maintenance, long service life, etc., compared with the all-plastic anti-corrosion pump made of surrounding materials. It also has the advantages of good creep resistance, installation performance and thermal deformation resistance. Flow range 3-300m3/h, Operating temperature - 20 - 110 ℃ The pump has been widely used in the transportation of corrosive media in chemical production, the transportation of electrolyte in nonferrous metal smelting and pharmaceutical, petroleum, electricity, electroplating, dyes, pesticides, paper making, food, textile, smelting, titanium dioxide, salt chemical, potassium compound fertilizer and other industries. It can transport sulfuric acid, hydrochloric acid, hydrofluoric acid, nitric acid, aqua regia, strong alkali, strong oxidant, organic solvent, reducing agent and other strong corrosive media of any concentration for a long time.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Hot oil circulating pump for thermal fluids heating system. RY Hot oil circulating pump for thermal fluids heating system Horizontal, Single stage single suction cantilever foot support structure, the inlet of pump is axial suction, the outlet is vertical upward. The pump is installed on the baseplate together with the motor. Double end ball bearing support with the front end with lubricating oil and the rear end lubricated with lubricating grease. There is a guide pipe in the middle for observing the sealing recovering thermal oil, Air-cooled for natural heating dissipation The combination of packing seal and mechanical seal is adopted. High-temperature resistant packing seal and hard alloy mechanical seal for the good sealing under high temperature conditions. PTFE lip seal. The pump is used to transfer high temperature liquids without solid particles. The fluids temperature up 350 degrees Celsius. Pump material: cast iron, stainless steel etc. Application Widely used in hot oil furnace oil supply circulation systems and hot oil heating circulation systems in industries such as petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food, and machinery etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
horizontal single stage end suction centrifugal pump. Horizontal end suction single stage centrifugal pump Single stage single suction cantilever structure, (The impeller is directly installed on the pump shaft and has only one suction port), International standard ISO2858 design for the centrifugal pump IS pumps are usually made of cast iron and the pumps are mainly used to transport clean water. IS pumps are widely used in urban water supply, industrial cooling water systems, agricultural irrigation, fire water supply and other fields. IR pump adopts a high-tech resistant mechanical seal to transport high-tech fluids such as hot water up to 120 degrees Celsius IH pumps are usually made of stainless steel SS304 or SS316 or duplex stainless steel and the pumps are mainly used to transport chemical fluids in Industries such as chemical, pharmaceutical, food processing, and seawater desalination etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---