metalworld.com

Magnets & Magnetic Seperation Equipment

Add a Listing       View Listings       Trader Access

Add a Listing       View Listings

Back to the Used Metal Manufacturing Equipment category

Contacts for Used Metal Manufacturing Equipment

Magnets & Magnetic Seperation Equipment





ADD A LISTING TO THE EXCHANGE

Magnets & Magnetic Seperation Equipment

Select the material / item to buy or sell :


Choose Wanted OR Available :


Country:

Email:




Magnets & Magnetic Seperation Equipment

AVAILABLE : Other Machinery and Equipment - LA1383026
Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
IS,ISR,IH horizontal single stage end suction centrifugal pump. Horizontal end suction single stage centrifugal pump Single stage single suction cantilever structure, (The impeller is directly installed on the pump shaft and has only one suction port), International standard ISO2858 design for the centrifugal pump IS pumps are usually made of cast iron and the pumps are mainly used to transport clean water. IS pumps are widely used in urban water supply, industrial cooling water systems, agricultural irrigation, fire water supply and other fields. IR pump adopts a high-tech resistant mechanical seal to transport high-tech fluids such as hot water up to 120 degrees Celsius IH pumps are usually made of stainless steel SS304 or SS316 or duplex stainless steel and the pumps are mainly used to transport chemical fluids in Industries such as chemical, pharmaceutical, food processing, and seawater desalination etc.
Quantity
Units
Frequency
500
each
Month
Price
Funds
Per Unit
1500
USD
each
To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :




AVAILABLE : Other Machinery and Equipment - LA1383024
Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Hot oil circulating pump for thermal fluids heating system. RY Hot oil circulating pump for thermal fluids heating system Horizontal, Single stage single suction cantilever foot support structure, the inlet of pump is axial suction, the outlet is vertical upward. The pump is installed on the baseplate together with the motor. Double end ball bearing support with the front end with lubricating oil and the rear end lubricated with lubricating grease. There is a guide pipe in the middle for observing the sealing recovering thermal oil, Air-cooled for natural heating dissipation The combination of packing seal and mechanical seal is adopted. High-temperature resistant packing seal and hard alloy mechanical seal for the good sealing under high temperature conditions. PTFE lip seal. The pump is used to transfer high temperature liquids without solid particles. The fluids temperature up 350 degrees Celsius. Pump material: cast iron, stainless steel etc. Application Widely used in hot oil furnace oil supply circulation systems ! a! nd hot oil heating circulation systems in industries such as petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food, and machinery etc.
Quantity
Units
Frequency
500
each
Month
Price
Funds
Per Unit
1600
USD
each
To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :




AVAILABLE : Other Machinery and Equipment - LA1383023
Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Ihf Ns High Temperature Fluorine Plastic Centrifugal Chemical Transfer Pump. IHF-NS high-temperature fluoroplastic centrifugal chemical transfer pump Single stage, single suction, cantilever centrifugal pump. The pump body is made of corrosion-resistant and wear-resistant non-metallic materials such as metal shell lined with fusible polytetrafluoroethylene (PFA) and fluorine ceramic alloy. The impeller and pump cover are made of metal inserts wrapped with fusible polytetrafluoroethylene (PFA) and pressed with fluorine ceramic alloy. Designed according to the international standard ISO2858 - The mechanical seal adopts a built-in water-cooling double end mechanical seal. Widely used in the transportation of highly corrosive media with a solid content of less than 15%, easily crystallized saturated solutions, strong alkalis, and other materials, suitable for continuous operation at a working temperature of 150 degrees Celsius. Suitable industries: acid and alkali production, saturated electrolytes in non-ferrous metal smelting, desulfurization and dust removal in the environmental protection industry, acid pickling and acid regeneration in the steel industry, etc.
Quantity
Units
Frequency
500
each
Month
Price
Funds
Per Unit
1950
USD
each
To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :




AVAILABLE : Other Machinery and Equipment - LA1383020
Shipping Pt. / Location: CHINA, SHANGHAI PORT
Chlf Light Duty Horizontal Multistage Stainless Steel Pump. Non-self-priming centrifugal pump is equipped with a lengthened shaft motor and maintenance free mechanical seal. The compact structure makes the pump size very small with axial inlet and radial outlet. Light duty multi-section multi-stage centrifugal pump is made of stainless steel material (304 or 316) and it has low noise, light corrosion resistance, beautiful appearance, small size, light weight, long service life, no leakage, smooth operation, and simple and reasonable structure. Scope of application: CHL, CHLK and CHLF (T) type light duty multistage centrifugal pumps are mainly used for household central air conditioning circulation and industrial liquid transmission such as demineralized water, soft water, purification system, light oil and other circulation and pressurization. 1) Small central air conditioning cycle 2) Cooling system 3) industrial cleaning 4) Water treatment (water purification) 5) Aquaculture 6) Fertilization/metering system 7) Environmental applications Working conditions: A liquid that is thin, clean, non-condensable, nonexplosive, and contains no solid particles or fibers. Liquid temperature: normal temperature -15 to 70degree celsius. Hot water type +70 to +110degree celsius; Maximum ambient temperature: +40℃ Maximum operating pressure: 10 bar The maximum inlet pressure is limited by the maximum operating pressure Medium acidity and alkalinity: pH4 to 9 Pumped liquid: 1 - Thin, clean, non-flammable and explosive liquid without solid particles or fibers. 2, pump can transport such as mineral water, softened water, pure water, oil and other light chemical medium. 3, when the conveying liquid density or viscosity is greater than water, if necessary, must be equipped with high-power motor. 4 - Whether the pump is suitable for a particular liquid is determined by a variety of factors, the most important of which is the chlorine content, pH value, temperature and solubility, oil content, etc. motor fully enclosed, air-cooled motor Protection class: IP55 Insulation grade: F Standard voltage, 50 hz: 1 x 220-240 - v 3 x 220-240 - v 380-415V
Quantity
Units
Frequency
500
each
Month
Price
Funds
Per Unit
300
USD
each
To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :




Add a Listing       View Listings

Back to the Used Metal Manufacturing Equipment category

Contacts for Used Metal Manufacturing Equipment



Cooksmill NetSystems
- File No: