Metal Machinery Equipment & Supplies Category

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Chlf Light Duty Horizontal Multistage Stainless Steel Pump. Light duty Horizontal stainless steel multistage pump Non-self-priming centrifugal pump is equipped with a lengthened shaft motor and maintenance free mechanical seal. The compact structure makes the pump size very small with axial inlet and radial outlet. Light duty multi-section multi-stage centrifugal pump is made of stainless steel material (304 or 316) and it has low noise, light corrosion resistance, beautiful appearance, small size, light weight, long service life, no leakage, smooth operation, and simple and reasonable structure. Scope of application: CHL, CHLK and CHLF (T) type light duty multistage centrifugal pumps are mainly used for household central air conditioning circulation and industrial liquid transmission such as demineralized water, soft water, purification system, light oil and other circulation and pressurization. 1) Small central air conditioning cycle 2) Cooling system 3) industrial cleaning 4) Water treatment (water purification) 5) Aquaculture 6) Fertilization/metering system 7) Environmental applications Working conditions: A liquid that is thin, clean, non-condensable, nonexplosive, and contains no solid particles or fibers. Liquid temperature: normal temperature -15℃ to +70℃ Hot water type +70℃ to +110℃ Maximum ambient temperature: +40℃ Maximum operating pressure: 10 bar The maximum inlet pressure is limited by the maximum operating pressure Medium acidity and alkalinity: pH4 to 9 Pumped liquid: 1 - Thin, clean, non-flammable and explosive liquid without solid particles or fibers. 2, pump can transport such as mineral water, softened water, pure water, oil and other light chemical medium. 3, when the conveying liquid density or viscosity is greater than water, if necessary, must be equipped with high-power motor. 4 - Whether the pump is suitable for a particular liquid is determined by a variety of factors, the most important of which is the chlorine content, pH value, temperature and solubility, oil content, etc. motor fully enclosed, air-cooled motor Protection class: IP55 Insulation grade: F Standard voltage, 50 hz: 1 x 220-240 - v 3 x 220-240 - v 380-415V

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
YCB External Gear Oil Pump. YCB gear oil pump is a new type of external meshing circular arc gear pump. The gear in the circular arc gear oil pump adopts the tooth profile compounded by advanced circular arc and other curves, so the pump has excellent working characteristics. The pump is compared with the traditional Involute gear oil pump; It is a new series of energy-saving pumps with the advantages of small pressure fluctuations, low noise, high efficiency, and long service life. YCB gear oil pump gear adopts double circular arc Sine wave tooth profile. Compared with Involute gear, its most outstanding advantage is that there is no relative sliding of the tooth profile during gear meshing, so the tooth surface is free of wear, running balance, no trapping, low noise, long life and high efficiency. This pump breaks free from the constraints of traditional design, allowing gear pumps to enter a new field in design, production, and use. The pump shaft end seal is designed in two forms: mechanical seal and packing seal. Users can choose according to their requirements Equipped with a differential pressure safety valve as overload protection, the total return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted separately within the allowable discharge pressure range according to actual needs. However, this safety valve cannot be used as a pressure reducing valve for long-term operation, and can be installed separately on the pipeline if necessary. YCB gear oil pump application: It can be used as transmission and Booster pump in oil transmission system. It can be used as a fuel pump for transportation, pressurization, and injection in the oil transportation system. It can be used as a lubricating oil pump in all industrial fields. Application scope of YCB gear oil pump: YCB gear oil pump is suitable for conveying lubricating oil without solid particles and fibers, corrosiveness, temperature not higher than 80 ℃, viscosity of 5-1500cst or other liquids similar to lubricating oil.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Ptfe Chemical Pump Magnetic Drive Coupling. PTFE chemical pump magnetic drive coupling no leakage and anticorrosion The anti leakage design of the fluoroplastic magnetic drive pump eliminates the shaft seal and utilizes magnetic coupling to indirectly drive, eliminating the problem of dripping and never polluting the working site. Due to the selection of "fluoroplastic alloy" for the overflow part of the pump, the pump can continuously transport corrosive media such as acids, alkalis, and strong oxidizing agents with any concentration. The liquid contact part is made of fluoroplastic F46/FEP/PTFE, but the pump casing is made of metal material, so the pump body is sufficient to withstand the weight of the pipeline and mechanical impact. Fluorine plastic magnetic drive pumps are widely used in industries such as petrochemical, acid and alkali production, non-ferrous metal smelting, acid washing processes in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, electroplating, radio, etc. Usage temperature: -20degree celsius to 100 degree celsius.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Ihf Ns High Temperature Fluorine Plastic Centrifugal Chemical Transfer Pump. IHF-NS high-temperature fluoroplastic centrifugal chemical transfer pump Single stage, single suction, cantilever centrifugal pump. The pump body is made of corrosion-resistant and wear-resistant non-metallic materials such as metal shell lined with fusible polytetrafluoroethylene (PFA) and fluorine ceramic alloy. The impeller and pump cover are made of metal inserts wrapped with fusible polytetrafluoroethylene (PFA) and pressed with fluorine ceramic alloy. Designed according to the international standard ISO2858 - The mechanical seal adopts a built-in water-cooling double end mechanical seal. Widely used in the transportation of highly corrosive media with a solid content of less than 15%, easily crystallized saturated solutions, strong alkalis, and other materials, suitable for continuous operation at a working temperature of 150 degrees Celsius. Suitable industries: acid and alkali production, saturated electrolytes in non-ferrous metal smelting, desulfurization and dust removal in the environmental protection industry, acid pickling and acid regeneration in the steel industry, etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
Hot oil circulating pump for thermal fluids heating system. RY Hot oil circulating pump for thermal fluids heating system Horizontal, Single stage single suction cantilever foot support structure, the inlet of pump is axial suction, the outlet is vertical upward. The pump is installed on the baseplate together with the motor. Double end ball bearing support with the front end with lubricating oil and the rear end lubricated with lubricating grease. There is a guide pipe in the middle for observing the sealing recovering thermal oil, Air-cooled for natural heating dissipation The combination of packing seal and mechanical seal is adopted. High-temperature resistant packing seal and hard alloy mechanical seal for the good sealing under high temperature conditions. PTFE lip seal. The pump is used to transfer high temperature liquids without solid particles. The fluids temperature up 350 degrees Celsius. Pump material: cast iron, stainless steel etc. Application Widely used in hot oil furnace oil supply circulation systems a! nd hot oil heating circulation systems in industries such as petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food, and machinery etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
IS,ISR,IH horizontal single stage end suction centrifugal pump. Horizontal end suction single stage centrifugal pump Single stage single suction cantilever structure, (The impeller is directly installed on the pump shaft and has only one suction port), International standard ISO2858 design for the centrifugal pump IS pumps are usually made of cast iron and the pumps are mainly used to transport clean water. IS pumps are widely used in urban water supply, industrial cooling water systems, agricultural irrigation, fire water supply and other fields. IR pump adopts a high-tech resistant mechanical seal to transport high-tech fluids such as hot water up to 120 degrees Celsius IH pumps are usually made of stainless steel SS304 or SS316 or duplex stainless steel and the pumps are mainly used to transport chemical fluids in Industries such as chemical, pharmaceutical, food processing, and seawater desalination etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---